Product Description

IGO-W3 Rebuildable Drip Atomizer (Note: this product is Clone)

  • Drip Atomizer
  • Sealed battery connector
  • Multiple Holes on casing and drip well for adjustable airflow
  • 510 Threaded
  • Phillips head screws for positive/negative post
  • 4 post for 1-8 Coil configuration
  • Rebuild using fiberglass or silica rope and wire
  • Stainless steel body and base
  • Fits most 510 drip tips
  • Wick and wire sold separately

Dimensions: 1-3/16″ x 7/8″ (length x diameter)
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note: Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used. 2. If it is not tested it is entirely the risk of the user. 3. Faulty wicks/coils WILL blow electronic devices. 4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection. 5. No new coil/wick assembly should be used on an electronic device until known to be safe. 6. These items destroy electronic devices if faulty. This is a known issue.